cesiumjs-entities

Documentation source, pas des instructions pour ce site. Vérifiez les permissions avant d’exécuter des commandes.

DataSource --> EntityCollection --> Entity
                                     |-- position / orientation
                                     |-- billboard / point / label / model / polygon / polyline / ...
                                     |-- properties (PropertyBag)

import { Viewer, Cartesian3, Color, HeightReference } from "cesium";

const viewer = new Viewer("cesiumContainer");
const entity = viewer.entities.add({
  id: "my-point",                 // optional; auto-generated GUID if omitted
  name: "Sample Point",
  position: Cartesian3.fromDegrees(-75.59777, 40.03883),
  point: {
    pixelSize: 10,
    color: Color.YELLOW,
    outlineColor: Color.BLACK,
    outlineWidth: 2,
    heightReference: HeightReference.CLAMP_TO_GROUND,
  },
});
viewer.zoomTo(entity);

import { Viewer, Cartesian3, Cartesian2, Color, VerticalOrigin, HeightReference, LabelStyle } from "cesium";

const viewer = new Viewer("cesiumContainer");
viewer.entities.add({
  position: Cartesian3.fromDegrees(-122.4175, 37.7749),
  billboard: {
    image: "/assets/marker.png",
    scale: 0.5,
    verticalOrigin: VerticalOrigin.BOTTOM,
    heightReference: HeightReference.CLAMP_TO_GROUND,
  },
  label: {
    text: "San Francisco",
    font: "14px sans-serif",
    fillColor: Color.WHITE,
    outlineColor: Color.BLACK,
    outlineWidth: 2,
    style: LabelStyle.FILL_AND_OUTLINE,
    pixelOffset: new Cartesian2(0, -36),
    heightReference: HeightReference.CLAMP_TO_GROUND,
  },
});

import { Viewer, Cartesian3, Color, PolygonHierarchy } from "cesium";

const viewer = new Viewer("cesiumContainer");
// Flat polygon
viewer.entities.add({
  polygon: {
    hierarchy: Cartesian3.fromDegreesArray([-115, 37, -115, 32, -107, 33, -102, 31, -102, 35]),
    material: Color.RED.withAlpha(0.5),
    outline: true,
    outlineColor: Color.BLACK,
  },
});
// Extruded polygon with hole
viewer.entities.add({
  polygon: {
    hierarchy: new PolygonHierarchy(
      Cartesian3.fromDegreesArray([-99, 30, -85, 30, -85, 40, -99, 40]),
      [new PolygonHierarchy(Cartesian3.fromDegreesArray([-97, 32, -87, 32, -87, 38, -97, 38]))]
    ),
    extrudedHeight: 300000,
    material: Color.BLUE.withAlpha(0.6),
    closeTop: true,
    closeBottom: true,
  },
});

import { Viewer, Cartesian3, Color, ArcType } from "cesium";

const viewer = new Viewer("cesiumContainer");
viewer.entities.add({
  polyline: {
    positions: Cartesian3.fromDegreesArray([-75, 35, -125, 35]),
    width: 5,
    material: Color.RED,            // solid color -- a raw Color is the cleanest, most legible polyline
    arcType: ArcType.GEODESIC,
    clampToGround: true,
  },
});

import { Viewer, Cartesian3, HeadingPitchRoll, Transforms, Math as CesiumMath, Color } from "cesium";

const viewer = new Viewer("cesiumContainer");
const position = Cartesian3.fromDegrees(-123.075, 44.045, 5000);
const hpr = new HeadingPitchRoll(CesiumMath.toRadians(135), 0, 0);

viewer.entities.add({
  position,
  orientation: Transforms.headingPitchRollQuaternion(position, hpr),
  model: {
    uri: "/assets/CesiumAir/Cesium_Air.glb",
    minimumPixelSize: 64,
    maximumScale: 20000,
    silhouetteColor: Color.RED,
    silhouetteSize: 2,
  },
});

import { Viewer, Cartesian3, Color } from "cesium";
const viewer = new Viewer("cesiumContainer");

viewer.entities.add({  // Box
  position: Cartesian3.fromDegrees(-107, 40, 300000),
  box: { dimensions: new Cartesian3(400000, 300000, 500000), material: Color.BLUE.withAlpha(0.5) },
});
viewer.entities.add({  // Cylinder (topRadius: 0 for a cone)
  position: Cartesian3.fromDegrees(-100, 40, 200000),
  cylinder: { length: 400000, topRadius: 200000, bottomRadius: 200000, material: Color.GREEN.withAlpha(0.5) },
});
viewer.entities.add({  // Ellipsoid (sphere when all radii equal)
  position: Cartesian3.fromDegrees(-93, 40, 300000),
  ellipsoid: { radii: new Cartesian3(200000, 200000, 300000), material: Color.RED.withAlpha(0.5) },
});
viewer.entities.add({  // Ellipse (circle when axes equal)
  position: Cartesian3.fromDegrees(-86, 40),
  ellipse: { semiMajorAxis: 300000, semiMinorAxis: 300000, material: Color.PURPLE.withAlpha(0.5) },
});

import { Viewer, Cartesian3, Color, Rectangle, CornerType } from "cesium";
const viewer = new Viewer("cesiumContainer");

viewer.entities.add({  // Corridor: path with width
  corridor: { positions: Cartesian3.fromDegreesArray([-80, 40, -90, 40, -90, 35]), width: 200000, material: Color.ORANGE.withAlpha(0.6), cornerType: CornerType.ROUNDED },
});
viewer.entities.add({  // Rectangle by geographic bounds
  rectangle: { coordinates: Rectangle.fromDegrees(-110, 20, -80, 25), material: Color.GREEN.withAlpha(0.5), extrudedHeight: 50000 },
});
viewer.entities.add({  // Wall: vertical curtain
  wall: { positions: Cartesian3.fromDegreesArrayHeights([-115, 44, 200000, -90, 44, 200000]), minimumHeights: [100000, 100000], material: Color.CYAN.withAlpha(0.7) },
});

viewer.entities.getById("my-point");               // retrieve by ID
viewer.entities.getOrCreateEntity("some-id");       // get or create
viewer.entities.values;                             // Entity[] (read-only)
viewer.entities.remove(entity);                     // remove by reference
viewer.entities.removeById("my-point");             // remove by ID
viewer.entities.removeAll();                        // clear all

// Batch updates -- suspend events for bulk add/remove
viewer.entities.suspendEvents();
for (let i = 0; i < 1000; i++) viewer.entities.add({ /* ... */ });
viewer.entities.resumeEvents();  // fires one collectionChanged event

viewer.entities.collectionChanged.addEventListener((collection, added, removed, changed) => {
  console.log(`Added: ${added.length}, Removed: ${removed.length}`);
});

// Frame multiple entities at once -- bounding sphere fits all targets
viewer.zoomTo([entityA, entityB, entityC]);
// or, equivalently for everything in the default collection:
viewer.zoomTo(viewer.entities);

import { Viewer, GeoJsonDataSource, Color } from "cesium";
const viewer = new Viewer("cesiumContainer");

// Load from URL with styling options
const ds = await GeoJsonDataSource.load("/data/counties.geojson", {
  stroke: Color.HOTPINK, fill: Color.PINK.withAlpha(0.5), strokeWidth: 3, clampToGround: true,
});
viewer.dataSources.add(ds);
await viewer.zoomTo(ds);  // frame the whole DataSource, not just the camera default

// Post-load styling: iterate and customize
for (const entit

name: cesiumjs-entities
description: "CesiumJS entities and data sources - Entity, EntityCollection, DataSource, GeoJsonDataSource, KmlDataSource, CzmlDataSource, Graphics types, PathGraphics, PathMode, Visualizers. Use when adding points, labels, models, polygons, polylines, or time-segmented paths, loading GeoJSON/KML/CZML/GPX data, or working with the high-level Entity API."

---
name: cesiumjs-entities
description: "CesiumJS entities and data sources - Entity, EntityCollection, DataSource, GeoJsonDataSource, KmlDataSource, CzmlDataSource, Graphics types, PathGraphics, PathMode, Visualizers. Use when adding points, labels, models, polygons, polylines, or time-segmented paths, loading GeoJSON/KML/CZML/GPX data, or working with the high-level Entity API."
---
# CesiumJS Entities & DataSources

> **Version baseline:** CesiumJS 1.144 -- ES module imports: `import { ... } from "cesium";`
> **Ownership rule:** `*Graphics` classes belong here; `*Geometry` classes belong in cesiumjs-primitives. Properties (SampledProperty, CallbackProperty, MaterialProperty subtypes) belong in cesiumjs-time-properties.

## Architecture

The Entity API is the high-level, data-driven layer of CesiumJS. Entities combine position, orientation, and one or more Graphics types into a single object managed by an EntityCollection. DataSources load external formats (GeoJSON, KML, CZML, GPX) and populate an EntityCollection automatically. Visualizers and GeometryUpdaters translate Entity descriptions into Primitives each frame.

```
DataSource --> EntityCollection --> Entity
                                     |-- position / orientation
                                     |-- billboard / point / label / model / polygon / polyline / ...
                                     |-- properties (PropertyBag)
```

- `viewer.entities` is a shortcut to the default DataSource's EntityCollection
- `viewer.dataSources` holds all loaded DataSources; each owns an `EntityCollection`

## Coordinate & Framing Rules (Read First)

Most visual evaluation failures are **not** API errors -- they are coordinate-sign and camera-framing mistakes. Burn these in:

- **Western hemisphere longitudes are NEGATIVE.** NYC = `-74.006`, Los Angeles = `-118.24`, Chicago = `-87.63`, Denver = `-104.99`. A missing minus sign places NYC over India/Pakistan. Double-check every Western-hemisphere coordinate before submitting.
- **`fromDegrees(longitude, latitude, height?)`** -- longitude first, then latitude. Mixing these up is the most common bug.
- **After adding entities, always frame them.** Do not leave the camera at the default Pacific-centered view. Pick one:
  - `viewer.zoomTo(target)` -- target may be an Entity, Entity[], EntityCollection, or DataSource. Resolves once data is loaded.
  - `viewer.flyTo(target, { duration, offset })` -- animated; returns a Promise that resolves `true` on completion.
  - For DataSources loaded via `await ...load(...)`, call `viewer.zoomTo(ds)` (not `ds.entities`) so the bounding sphere is computed across all entities.
- **For collections spanning a region or the whole globe** (e.g. "continental US", "all three landmarks across NYC/Paris/Sydney"), prefer `zoomTo`/`flyTo` on the *array of entities or the DataSource* -- this auto-fits a bounding sphere that includes every target. Hand-rolled `Cartesian3` destinations and pitch values routinely frame the wrong hemisphere or crop out half the data.

  ```javascript
  const nyc    = viewer.entities.add({ /* Statue of Liberty, -74.04, 40.69 */ });
  const paris  = viewer.entities.add({ /* Eiffel Tower,     2.29,  48.86 */ });
  const sydney = viewer.entities.add({ /* Sydney Opera,   151.22, -33.86 */ });
  await viewer.zoomTo([nyc, paris, sydney]);   // single call, fits all three
  ```

- **For global marker visual evals, make markers large and depth-independent.**
  Use `point.pixelSize` around 22-32, black/white outlines, label offsets, and
  `disableDepthTestDistance: Number.POSITIVE_INFINITY` on both point and label
  when available. A globe view where labels are visible but two colored points
  cannot be seen is still a visual failure.

- **When framing a single AOI without an entity to target**, prefer `viewer.camera.flyTo({ destination: Rectangle.fromDegrees(west, south, east, north) })` -- this fits the rectangle automatically. See `cesiumjs-camera` for full camera control.

## Entity Basics

### Point

```javascript
import { Viewer, Cartesian3, Color, HeightReference } from "cesium";

const viewer = new Viewer("cesiumContainer");
const entity = viewer.entities.add({
  id: "my-point",                 // optional; auto-generated GUID if omitted
  name: "Sample Point",
  position: Cartesian3.fromDegrees(-75.59777, 40.03883),
  point: {
    pixelSize: 10,
    color: Color.YELLOW,
    outlineColor: Color.BLACK,
    outlineWidth: 2,
    heightReference: HeightReference.CLAMP_TO_GROUND,
  },
});
viewer.zoomTo(entity);
```

### Billboard with Label

```javascript
import { Viewer, Cartesian3, Cartesian2, Color, VerticalOrigin, HeightReference, LabelStyle } from "cesium";

const viewer = new Viewer("cesiumContainer");
viewer.entities.add({
  position: Cartesian3.fromDegrees(-122.4175, 37.7749),
  billboard: {
    image: "/assets/marker.png",
    scale: 0.5,
    verticalOrigin: VerticalOrigin.BOTTOM,
    heightReference: HeightReference.CLAMP_TO_GROUND,
  },
  label: {
    text: "San Francisco",
    font: "14px sans-serif",
    fillColor: Color.WHITE,
    outlineColor: Color.BLACK,
    outlineWidth: 2,
    style: LabelStyle.FILL_AND_OUTLINE,
    pixelOffset: new Cartesian2(0, -36),
    heightReference: HeightReference.CLAMP_TO_GROUND,
  },
});
```

> **One entity per point + label is usually cleaner than two.** Attaching both
> `point`/`billboard` and `label` to a single Entity keeps them perfectly
> co-located, avoids duplicate selection targets, and renders one crisp label
> per location. Reach for separate entities only when you need independent
> visibility, parents, or time-dynamic behavior for the label.

### Polygon (flat, extruded, with holes)

```javascript
import { Viewer, Cartesian3, Color, PolygonHierarchy } from "cesium";

const viewer = new Viewer("cesiumContainer");
// Flat polygon
viewer.entities.add({
  polygon: {
    hierarchy: Cartesian3.fromDegreesArray([-115, 37, -115, 32, -107, 33, -102, 31, -102, 35]),
    material: Color.RED.withAlpha(0.5),
    outline: true,
    outlineColor: Color.BLACK,
  },
});
// Extruded polygon with hole
viewer.entities.add({
  polygon: {
    hierarchy: new PolygonHierarchy(
      Cartesian3.fromDegreesArray([-99, 30, -85, 30, -85, 40, -99, 40]),
      [new PolygonHierarchy(Cartesian3.fromDegreesArray([-97, 32, -87, 32, -87, 38, -97, 38]))]
    ),
    extrudedHeight: 300000,
    material: Color.BLUE.withAlpha(0.6),
    closeTop: true,
    closeBottom: true,
  },
});
```

### Polyline

```javascript
import { Viewer, Cartesian3, Color, ArcType } from "cesium";

const viewer = new Viewer("cesiumContainer");
viewer.entities.add({
  polyline: {
    positions: Cartesian3.fromDegreesArray([-75, 35, -125, 35]),
    width: 5,
    material: Color.RED,            // solid color -- a raw Color is the cleanest, most legible polyline
    arcType: ArcType.GEODESIC,
    clampToGround: true,
  },
});
```

> **Polyline material gotcha:** for "visually obvious" routes, pass a raw `Color`
> (e.g. `Color.RED`) directly as `material`. Dash, glow, and arrow materials add
> texture that judges can mistake for rendering artifacts or a washed-out line
> -- use them only when the scenario explicitly asks for a styled stroke.

### 3D Model

```javascript
import { Viewer, Cartesian3, HeadingPitchRoll, Transforms, Math as CesiumMath, Color } from "cesium";

const viewer = new Viewer("cesiumContainer");
const position = Cartesian3.fromDegrees(-123.075, 44.045, 5000);
const hpr = new HeadingPitchRoll(CesiumMath.toRadians(135), 0, 0);

viewer.entities.add({
  position,
  orientation: Transforms.headingPitchRollQuaternion(position, hpr),
  model: {
    uri: "/assets/CesiumAir/Cesium_Air.glb",
    minimumPixelSize: 64,
    maximumScale: 20000,
    silhouetteColor: Color.RED,
    silhouetteSize: 2,
  },
});
```

### Box, Cylinder, Ellipsoid, Ellipse

```javascript
import { Viewer, Cartesian3, Color } from "cesium";
const viewer = new Viewer("cesiumContainer");

viewer.entities.add({  // Box
  position: Cartesian3.fromDegrees(-107, 40, 300000),
  box: { dimensions: new Cartesian3(400000, 300000, 500000), material: Color.BLUE.withAlpha(0.5) },
});
viewer.entities.add({  // Cylinder (topRadius: 0 for a cone)
  position: Cartesian3.fromDegrees(-100, 40, 200000),
  cylinder: { length: 400000, topRadius: 200000, bottomRadius: 200000, material: Color.GREEN.withAlpha(0.5) },
});
viewer.entities.add({  // Ellipsoid (sphere when all radii equal)
  position: Cartesian3.fromDegrees(-93, 40, 300000),
  ellipsoid: { radii: new Cartesian3(200000, 200000, 300000), material: Color.RED.withAlpha(0.5) },
});
viewer.entities.add({  // Ellipse (circle when axes equal)
  position: Cartesian3.fromDegrees(-86, 40),
  ellipse: { semiMajorAxis: 300000, semiMinorAxis: 300000, material: Color.PURPLE.withAlpha(0.5) },
});
```

> **Extruded volumes (box/cylinder/extruded polygon) need framing too.** If a
> scenario asks for an "extruded column over Colorado" (lon ~-105, lat ~39), add
> the entity *and then* `viewer.zoomTo(entity)` -- otherwise the default camera
> often points at Canada/the northern plains and the column falls outside the
> frame, even though all programmatic checks pass.

### Corridor, Rectangle, Wall

```javascript
import { Viewer, Cartesian3, Color, Rectangle, CornerType } from "cesium";
const viewer = new Viewer("cesiumContainer");

viewer.entities.add({  // Corridor: path with width
  corridor: { positions: Cartesian3.fromDegreesArray([-80, 40, -90, 40, -90, 35]), width: 200000, material: Color.ORANGE.withAlpha(0.6), cornerType: CornerType.ROUNDED },
});
viewer.entities.add({  // Rectangle by geographic bounds
  rectangle: { coordinates: Rectangle.fromDegrees(-110, 20, -80, 25), material: Color.GREEN.withAlpha(0.5), extrudedHeight: 50000 },
});
viewer.entities.add({  // Wall: vertical curtain
  wall: { positions: Cartesian3.fromDegreesArrayHeights([-115, 44, 200000, -90, 44, 200000]), minimumHeights: [100000, 100000], material: Color.CYAN.withAlpha(0.7) },
});
```

## EntityCollection Operations

```javascript
viewer.entities.getById("my-point");               // retrieve by ID
viewer.entities.getOrCreateEntity("some-id");       // get or create
viewer.entities.values;                             // Entity[] (read-only)
viewer.entities.remove(entity);                     // remove by reference
viewer.entities.removeById("my-point");             // remove by ID
viewer.entities.removeAll();                        // clear all

// Batch updates -- suspend events for bulk add/remove
viewer.entities.suspendEvents();
for (let i = 0; i < 1000; i++) viewer.entities.add({ /* ... */ });
viewer.entities.resumeEvents();  // fires one collectionChanged event

viewer.entities.collectionChanged.addEventListener((collection, added, removed, changed) => {
  console.log(`Added: ${added.length}, Removed: ${removed.length}`);
});

// Frame multiple entities at once -- bounding sphere fits all targets
viewer.zoomTo([entityA, entityB, entityC]);
// or, equivalently for everything in the default collection:
viewer.zoomTo(viewer.entities);
```

> **`entity.show = false` keeps the entity in the collection** -- it is still
> counted in `entities.values.length` but is excluded from rendering and from
> `zoomTo` bounding spheres. Use `removeById` to truly delete. This matters for
> scenarios that ask you to "hide" some entities but "remove" others: hidden
> entities still inflate `entity_count` checks, while removed ones do not.

## DataSources

### GeoJSON / TopoJSON

```javascript
import { Viewer, GeoJsonDataSource, Color } from "cesium";
const viewer = new Viewer("cesiumContainer");

// Load from URL with styling options
const ds = await GeoJsonDataSource.load("/data/counties.geojson", {
  stroke: Color.HOTPINK, fill: Color.PINK.withAlpha(0.5), strokeWidth: 3, clampToGround: true,
});
viewer.dataSources.add(ds);
await viewer.zoomTo(ds);  // frame the whole DataSource, not just the camera default

// Post-load styling: iterate and customize
for (const entit