pfc-asphalt-mixture
Build PFC 5.0 asphalt-mixture specimens with explicit aggregate objects, a declared homogenized-mastic or fine-particle abstraction, residual air voids, measured gradation conversion, contact-pair assignment, compaction, equilibrium, and mass-volume closure; use before Marshall, rutting, creep, or strength tests.
Echo-aloha · 已有 AI 审核记录
安装与使用
运行命令前先阅读来源与依赖说明。复制命令不会自动安装或执行。
npx skills add Echo-aloha/asphalt-codex-skills-5 --skill pfc-asphalt-mixture技能说明
name: pfc-asphalt-mixture description: Build PFC 5.0 asphalt-mixture specimens with explicit aggregate objects, a declared homogenized-mastic or fine-particle abstraction, residual air voids, measured gradation conversion, contact-pair assignment, compaction, equilibrium, and mass-volume closure; use before Marshall, rutting, creep, or strength tests.
PFC Asphalt Mixture Modeling
Use this skill to build the load-ready digital specimen for asphalt concrete in
PFC2D/PFC3D 5.0. It distinguishes physical phases from DEM objects: aggregate may be
explicit balls/clumps, mastic may be homogenized into contact laws or partly resolved by
fine particles, and air voids remain pore space. This skill produces the specimen only;
the parent route is pfc5-asphalt-workflow.
When To Use
Use this skill when the user needs to:
- Build a PFC asphalt-mixture specimen from scratch (2D or 3D), including a source-defined wheel-tracking slab or a standard/large Marshall specimen formed by the selected current method.
- Convert an aggregate gradation (AC-13/16/20 级配曲线) into particle counts / clump templates.
- Decide how to assign different contact models across 集料-集料、集料-砂浆、砂浆-砂浆、集料-墙 contact pairs.
- Choose coarse aggregate as clump versus ball, declare the resolvable fine fraction, and set a target air-void content from the selected mix design/standard.
- Prepare a reproducible, staged specimen (00_setup → 01_particles → 02_settled → 03_compacted → 04_burger) before any mechanical test.
Do NOT use this skill for loading tests themselves — route those to pfc-rutting-test, pfc-marshall-test, or pfc5-standard-tests.
Required Inputs
Ask for these if missing:
- Dimension: 2D or 3D; specimen size and provenance. For current Chinese methods, record the JTG 3410-2025 forming method separately from the performance method (for example T 0702 before T 0709, or T 0703 before T 0719).
- Gradation: AC-13 / AC-16 / AC-20, with sieve passing percentages (or a
gradation_*.csv). - Binder content with an explicit convention (binder/aggregate or binder/mixture); never convert mass to volume without constituent densities.
- Contact-model plan: which pairs use linear / Hertz / Burger (see
references/overview.md). - Target air-void content and the sieve/size boundary between resolved and homogenized fractions.
- Measured constituent densities and whether coarse aggregate uses clump templates.
- Aggregate test provenance from JTG 3432-2024 or the applicable project/laboratory record, including sieve, density/absorption and any shape metric used to justify the DEM representation.
Three-Phase Characterization
Asphalt mixture = 三相复合材料. Model each phase distinctly:
Keep the physical gradation classification separate from the DEM resolution boundary. Any sieve value below is project/specification data, not a universal switch that forces one PFC object type.
| 相 | 物理组成 | PFC 表示 |
|---|---|---|
| 项目定义的粗集料 | 按所选级配/规范定义 | clump、ball 或其他已验证形状表示;由形状目标和分辨率决定 |
| 项目定义的细集料+矿粉 | 按所选级配及可分辨尺度定义 | 可解析为 ball/clump,或并入均质砂浆/接触抽象;必须声明截断边界 |
| 沥青砂浆 | 沥青 + 细料 + 矿粉的均质化胶浆 | 可由接触模型等效;这不是显式砂浆体积 |
| 空隙 | 项目/试验/规范给定的目标空隙率 | 颗粒间剩余孔隙(压实控制并做质量-体积闭合) |
Two common modeling routes:
- Route A (homogenized mastic): explicit aggregate plus a calibrated contact law. It is economical, but binder/mastic mass is not automatically represented by object volume.
- Route B (resolved fines): add resolvable fine/filler particles and define aggregate-fine/fine-fine interfaces. Binder may still be homogenized at contacts, so do not call this a literal three-particle-phase model unless binder objects exist.
Gradation Conversion
Convert sieve passing percentages into retained-bin mass/volume fractions, then into
resolved objects only after applying constituent densities and the declared DEM cutoff.
See references/gradation.md for the user-input schema and conversion procedure. It
deliberately does not bundle standard gradation tables. Key rule:
各档留存比例 = 相邻筛孔通过率之差;object type follows the declared shape/resolution
abstraction rather than a fixed sieve; target volumes must satisfy the selected binder
convention, constituent densities, air voids and mass-volume closure.
Contact-Model Assignment
| 接触对 | 推荐模型 | 说明 |
|---|---|---|
| 集料-集料 | linear 或经论证的 bonded law | linear 表示无黏结摩擦;contact bond 不能标成“无黏结” |
| 集料-等效砂浆界面 | Burger 或标定的界面模型 | 只有相应对象/分组存在时才能分配 |
| 细料-细料/砂浆等效接触 | Burger | 需由宏观蠕变/动态响应反演 |
| 集料-墙/压头 | 经标定的 linear 或适用界面模型 | 钢模、压头、橡胶轮及润滑条件分别标定;不预设“高摩擦” |
Details and PFC command templates in references/overview.md and the sibling skill pfc-burger-viscoelastic.
Default Modeling Pipeline (Staged, Resumable)
Use this as a default auditable route. Stage names may be renamed, merged or skipped for imported specimens or alternative preparation methods if the same state provenance, checks and restart points remain explicit.
setup: create the domain and dimensionality-appropriate specimen boundaries, save00_setup.particles: generate the declared resolved fractions with the selected ball/clump/shape abstraction, save01_particles.settle: use the declared deposition/compaction preparation; identify and treat floaters with a stated criterion rather than deleting them automatically, save02_settled.compact: top-wall downward compaction to target porosity/height, save03_compacted.contacts: audit existing contacts and futurecmatdefaults, install final contact models with a PFC5-verified procedure, re-equilibrate, save04_contacts.- Hand off the load-ready specimen to
pfc-rutting-test/pfc-marshall-test/pfc5-standard-tests.
Working Rules
- Use PFC 5.0
cmatsemantics and reject unsupported newer-major command families. This package does not maintain a cross-version migration route. - Fix the random seed and record it — asphalt specimen generation must be reproducible.
- Select the generator intentionally: PFC5 `ball/clump distr