Skip to content
OpenAgentSkill
Browsing is open · Catalog captured 2026-11-21 · Automatic updates and account services are paused.
Development

validate

Verify a change is ready to ship by checking it against its acceptance criteria and running the repo's own quality gates in order, then report a pass/fail verdict with the exact failures. Use to decide go/no-go right before shipping — when you want a pass/fail verdict against acceptance criteria and the repo's quality gates (lint/build/test), not a code critique (use `review` for that). It reports — it does not fix (route failures to `pr-fix`/`implement`) and does not ship.

ronaknnathani · Static checks on file

Installation

Read the source and dependencies before running a command. Copying does not install or execute anything.

npx skills add ronaknnathani/relay --skill validate

About this skill


name: validate description: Verify a change is ready to ship by checking it against its acceptance criteria and running the repo's own quality gates in order, then report a pass/fail verdict with the exact failures. Use to decide go/no-go right before shipping — when you want a pass/fail verdict against acceptance criteria and the repo's quality gates (lint/build/test), not a code critique (use review for that). It reports — it does not fix (route failures to pr-fix/implement) and does not ship.

Validate

Decide whether a change is ready to ship and report the verdict — pass, or fail with the exact failures someone else can act on. The bar: every acceptance criterion from clarify/plan is demonstrably met, and every quality gate the repo defines is green, each shown by a command or observation rather than asserted. This skill is a gate, not a fixer: on failure it hands precise error-feedback to pr-fix or implement and stops. It does not edit code and does not ship.

Process

  1. Gather the acceptance criteria. Read the Success criteria from the clarify/plan artifacts. These are the goal-backward targets — what must be TRUE about the codebase. If no artifact exists, reconstruct the criteria from the task description and list them, so the verdict is checkable.
  2. Discover the repo's own gate commands. Find how this repo lints, type-checks, tests, builds, and audits — from its scripts/manifest/CI config (explore when it isn't obvious). Use the repo's actual commands; never substitute a generic command or invent a gate the repo doesn't define. A gate the repo doesn't have is skipped as not-applicable (and noted), not faked.
  3. Run every applicable quality gate — none skippable. The gates, in report order: lint → typecheck → unit tests → build → integration → e2e → security/audit → bundle-size. This sequence is the reporting/intent order, not a stop-on-first-failure barrier: run independent gates in parallel when the tooling allows (dispatch sub-agents when available; otherwise inline), never stop at the first failure, and capture every gate's output so the report is complete in one pass.
  4. Check each acceptance criterion, goal-backward. For each criterion, name the test, command, or direct observation that demonstrates it holds — and run/observe it. A criterion with no evidence is a FAIL, not a pass-by-assertion; "looks done" is not evidence.
  5. Render the verdict. PASS only if every applicable gate is green AND every acceptance criterion has passing evidence. Otherwise FAIL. Report, for each failure: the exact command run, its error output, and the location (file/line/criterion) — this is the error-feedback pr-fix or implement consumes. Do not attempt deep fixes here; a one-line obvious typo is still routed out, not silently patched.

Never mask a failure to go green

Disabling a test, skipping a spec, loosening a lint rule, or lowering a threshold to make a gate pass is a hard red flag — it converts a real failure into a hidden one. If a gate fails, report it as a FAIL with its evidence and route it out. The only legitimate "skip" is a gate the repo genuinely does not define, recorded as not-applicable.

Output schema (the verdict)

# Validation: <task>  — VERDICT: PASS | FAIL
## Gates
  - <gate>: PASS | FAIL | N/A — `<exact command>`  (on FAIL: error + location)
## Acceptance criteria
  - [x] <criterion> — evidence: <test/command/observation>
  - [ ] <criterion> — FAIL: <what's missing + where>
## Failures (for pr-fix / implement)
  - `<exact command>` → <error output> @ <file:line | criterion>

A PASS verdict means nothing in the Failures section. List every failure, not just the first — one pass should give the fixer everything to act on.

Red flags

  • Skipping a gate that applies, or running them out of order, instead of the full lint→…→bundle-size sequence.
  • Disabling/loosening a test, spec, lint rule, or threshold to turn a gate green.
  • Substituting a generic command for the repo's own gate command, or inventing a gate the repo lacks.
  • Marking an acceptance criterion PASS without a test/command/observation behind it.
  • Editing code to fix a failure here instead of routing it to pr-fix/implement.
  • Reporting only the first failure when later gates also failed — the fixer needs the whole set.
  • Shipping, merging, or invoking the next skill — validate returns a verdict and stops.

Verification checklist

  • Acceptance criteria came from the clarify/plan artifact (or were reconstructed and listed).
  • Gate commands are the repo's own, discovered from its config — not generic or invented.
  • Every applicable gate ran in order; results captured; none skipped or masked to go green.
  • Each acceptance criterion is backed by a named test/command/observation, not assertion.
  • The verdict is PASS only with all gates green and all criteria evidenced; else FAIL.
  • Each failure reports exact command + error + location for pr-fix/implement to consume.
  • No code was edited, nothing was shipped, and no next skill was invoked.